Call 08048617080 71% Response Rate

Send Email

IKO Roller Bearing

Our range of products include self aligning needle roller bearing, open ends drawn cup needle roller bearing, round drawn cup roller clutches, needle cylindrical roller bearing, rna49 round needle roller bearing and full complement needle roller bearing.
Self Aligning Needle Roller Bearing

Self Aligning Needle Roller Bearing

Product Price: Rs 200 / PieceGet Best Price

Product Brochure

Product Details:
Weight300 gm
MaterialStainless Steel
BrandIKO
ShapeRound
Thickness10 mm
Surface FinishingPolished
Outside Diameter25 mm
Bore Size50 mm
Self Aligning Needle Roller Bearing each comprise an outer ring having spherical outside surface; a deep drawn steel collar around the outside surface of outer ring, and; a resin support ring situated between the outer ring and the collar so that the bearing can be automatically aligned; the inner ring alone can be separated from the bearing.

This bearing product has advantages that it can be used on a highly flexible shaft or in an area where alignment with the housing bore is difficult. Also, this bearing product is easy to handle: for example, it is axially positioned without using a snap ring by simply pressfitting into the housing bore in an appropriate fit mode.

Bearing Accuracy :
  • The dimensional accuracy and profile accuracy of any NTN self-aligning needle roller bearing shall be per JIS Class 0 specified in JIS B 1514 “Rolling bearings-Tolerances”. This does not apply to the outside diameter and width of precision drawn collar.
Get Best QuoteRequest A Callback
Open Ends Drawn Cup Needle Roller Bearing

Open Ends Drawn Cup Needle Roller Bearing

Product Price: Rs 50 / PieceGet Best Price

Product Details:
Weight1 Kg
MaterialStainless Steel
BrandIKO
Bore Size35 mm
Packaging TypeBox
Surface FinishingPolished
Thickness20 mm
Hardness55 HRC

Open Ends Drawn Cup Needle Roller Bearing have a deep drawn, thin-walled outer ring. Drawn cup needle roller bearings are typically used in applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly, but where a very compact and economical bearing arrangement is required. These bearings are mounted with a tight interference fit in the housing. That enables a simple and economic design of the housing bore, as shoulders or snap rings are not required to locate the bearing axially.

The drawn cup of hardened steel and the needle roller and cage assembly of these bear­ings form a non­-separable unit.


Other Details:

  • Designs and variants
  • Bearing data
  • Loads
  • Temperature limits
  • Permissible speed
  • Design considerations
  • Mounting
  • Designation system
Get Best QuoteRequest A Callback
Round Drawn Cup Roller Clutches

Round Drawn Cup Roller Clutches

Product Price: Rs 180 / PieceGet Best Price

Product Details:
MaterialStainless Steel
BrandIKO
ShapeRound
Packaging TypeBox
Inner Diameter22 mm
Outer Diameter35 mm
Hardness55 HRC
FinishPolished
Other Detail:
  • Are one-way clutches, which transmit torques in one direction 
  • Are available with or without an integrated bearing arrangement
  • Give very precise indexing
  • Allow high indexing frequencies
  • Have a low overrunning frictional torque
  • Are available with or without greasing
  • Are particularly compact in a radial direction and therefore permit extremely compact designs
  • Are suitable for housing materials made from steel, light metal or plastic
  • Can be combined with drawn cup needle roller bearings with open ends HK and drawn cup needle roller bearings with closed end BK
  • Have an extensive range of applications, for example as indexing clutches, back-stopping clutches and overrunning clutches 
Get Best QuoteRequest A Callback
Needle Cylindrical Roller Bearing

Needle Cylindrical Roller Bearing

Product Price: Rs 100 / PieceGet Best Price

Product Details:
BrandIKO
MaterialStainless Steel
ShapeRound
Bore Size65 mm
Outside Diameter100 mm
Packaging TypeBox
Surface FinishingPolished
Thickness20 mm
Details:
  • consist of a radial needle roller bearing and a cylindrical roller thrust bearing
    The cylindrical roller and cage thrust assembly is identical to the 811 series. are supplied without an inner ring can be combined with an inner ring, where the shaft cannot be hardened and ground (data table, must be ordered separately) can accommodate axial loads in one direction can locate the shaft in one direction only can be mounted back-to-back  for short shafts and where changes in length due to thermal expansion are relatively minor For these types of arrangements, SKF recommends preloading the thrust ball bearings with Belleville washers (cup springs). This elastic preload helps to prevent the balls from skidding if one of the thrust bearings becomes unloaded. Preload also improves performance of the thrust ball bearings while reducing noise levels. are separable can be mounted separately from both the cylindrical roller and cage thrust assembly and the shaft washer should be oil lubricated, as oil facilitates an adequate supply of lubricant to the bearing have no stamped steel cover, as standard have a stamped steel cover for bearings with designation suffix Z that: has no lubrication holes extends over the shaft washer of the cylindrical roller thrust bearing is firmly attached to the housing washer that is integral to the needle roller bearing outer ring makes these bearings non-separable.

Sealing Solution:
  • Needle cylindrical Roller Bearings capped with a stamped steel cover over the thrust part of the bearing, designation suffix Z). The cover, which has no lubrication holes, forms a gap-type seal to retain the grease in the bearing.
  • When capped bearings must operate under certain conditions, such as very high speeds or high temperatures, some grease may leak. For bearing arrangements where this would be detrimental, appropriate actions could be taken.

Greases For Capped Bearings:
  • The thrust part of combined needle roller bearings with the designation suffix Z is supplied greased as standard. They are filled with high-quality grease under clean conditions.
  • The relatively large quantity of grease in the bearings means they can be operated for long periods before relubrication is required. 

Relubrication Features:
  • The needle roller bearing used in combined bearings has an annular groove with one lubrication hole in the outer ring.

Cages:
  • When used at high temperatures, some lubricants can have a detrimental effect on polyamide cages.
  • For additional information about the suitability of cages, refer to Cages.
Get Best QuoteRequest A Callback
RNA49 Round Needle Roller Bearing

RNA49 Round Needle Roller Bearing

Product Price: Rs 250 / PieceGet Best Price

Product Details:
Weight1.5 Kg
MaterialStainless Steel
BrandIKO
ShapeRound
Packaging TypeBox
Outer Diameter46 mm
Model NumberRNA49
Inner Diameter20 mm

With the help of our technically sound infrastructure, we are able to supply and wholesale a quality approved range of RNA49 Round Needle Roller Bearing.

 

Features:

  • Sturdy and strong construction

  • Durable in nature

  • Longer working life

  • Ability to withstand extreme temperature

  • Optimum grade

  • Superb wear resistance

Get Best QuoteRequest A Callback
Full Complement Needle Roller Bearing

Full Complement Needle Roller Bearing

Product Price: Rs 100 / PieceGet Best Price

Product Details:
Weight5 Kg
MaterialStainless Steel
BrandIKO
ShapeRound
Hardness65 HRC
Packaging TypeBox
Thickness10 mm
Surface FinishingPolished
Inner Diameter20 mm
Outer Diameter30 mm
Full Complement Needle Roller Bearing, as invented and introduced by Torrington, employs a full complement of rollers. The full complement drawn cup bearing combines maximum capacity and low cost with the advantages of the drawn outer ring.
The inward turned lips of the cup are used to mechanically retain the full complement of needle rollers to provide positive radial retention of rollers even though it may be necessary to remove the shaft repeatedly during the servicing of the mechanism employing the bearing. Needle bearings need to run on harden shafting or harden inner rings. Inner Rings Section If you don't see your sizes please Contact Us. 
Get Best QuoteRequest A Callback
6 mm Needle Roller Bearing

6 mm Needle Roller Bearing

Product Price: Rs 100 / PieceGet Best Price

Product Details:
Weight350 gm
BrandIKO
ShapeRound
MaterialStainless Steel
Packaging TypeBox
Thickness6 mm
Bore Size60 mm
Model NumberRNA69
Lightweight rotational motion components that keep things rolling:
  • IKO designs and develops needle roller bearings to enable reliable and smooth rotational motion in numerous applications. This unique design incorporates a thin, needle-shaped roller into the moving element to achieve high load capacity in a small footprint.

Multiple styles and sizes available
  • Lower cross-section height and higher load capacity than traditional ball bearings.
  • Small and compact for reduced overall machine size in lightweighting efforts.
  • Widely used in automobiles, motorcycles, printing presses, industrial robots, construction equipment and other demanding applications.
  • Many styles to choose from including: radial, thrust and combined models, cam followers and roller followers
Get Best QuoteRequest A Callback
Shell Type Needle Roller Bearings

Shell Type Needle Roller Bearings

Product Price: Rs 100 / PieceGet Best Price

Product Details:
Weight6 Kg
MaterialStainless Steel
BrandIKO
ShapeRound
Packaging TypeBox
Thickness4 mm
Inner Diameter80 mm
Outer Diameter100 mm

Shell Type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the needle roller bearings. Two types of shell style bearings are available caged and full complement:

  • Caged bearings for high-speed rotation feature precise needle rollers, accurately guided by a cage and thrust rings.
  • Full complement bearings for heavy loads and low-speed rotation are press-fit into the housing and do not require any fixtures for axial positioning, offering an economical option for mass-produced goods.
Get Best QuoteRequest A Callback
Needle Roller Cage Assemblies

Needle Roller Cage Assemblies

Product Price: Rs 100 / PieceGet Best Price

Product Details:
MaterialStainless Steel
BrandIKO
ShapeRound
Packaging TypeBox
Inner Diameter20 mm
Outer Diameter30 mm
Hardeness45 HRC
FinishPolished

Needle Roller Cage Assemblies are self­-contained, ready-­to­-mount bearings. In applications where the shaft and housing bore can serve as raceways, the assemblies can be used to create bearing arrangements that require minimal radial space.


Other Details:

  • Designs and variants
  • Bearing data
  • Loads
  • Temperature limits
  • Permissible speed
  • Design considerations
  • Designation system
Get Best QuoteRequest A Callback
Needle Bearings

Needle Bearings

Product Price: Rs 150 / PieceGet Best Price

Product Details:
Weight500 gm
MaterialStainless Steel
BrandIKO
ShapeRound
Surface FinishingPolished
Hardness45 HRC
Packaging TypeBox
Inner Diameter20 mm
Outer Diameter30 mm
Lightweight rotational motion components that keep things rolling:
  • IKO designs and develops needle roller bearings to enable reliable and smooth rotational motion in numerous applications. This unique design incorporates a thin, needle-shaped roller into the moving element to achieve high load capacity in a small footprint.

Multiple Styles And Sizes Available:
  • Lower cross-section height and higher load capacity than traditional ball bearings.
  • Small and compact for reduced overall machine size in lightweighting efforts.
  • Widely used in automobiles, motorcycles, printing presses, industrial robots, construction equipment and other demanding applications.
  • Many styles to choose from including: radial, thrust and combined models, cam followers and roller followers..
Get Best QuoteRequest A Callback
4 mm Needle Roller Bearings

4 mm Needle Roller Bearings

Product Price: Rs 100 / PieceGet Best Price

Product Details:
Weight300 gm
MaterialStainless Steel
BrandIKO
ShapeRound
Hardness65 HRC
Packaging TypeBox
Thickness4 mm
Surface FinishingPolished
Get Best QuoteRequest A Callback
BK Needle Roller Bearing

BK Needle Roller Bearing

Product Price: Rs 220 / PieceGet Best Price

Product Details:
Weight0.0021 kg
MaterialStainless Steel
BrandIKO
ShapeRound
Hardness65 HRC
Packaging TypeBox
Thickness10 mm
Reference speed22000 r/min
Limiting Speed24000 r/min
Inside Diameter20 mm
Outside Diameter26 mm
Get Best QuoteRequest A Callback
Yoke Type Track Rollers

Yoke Type Track Rollers

Product Price: Rs 200 / PieceGet Best Price

Product Details:
MaterialMild Steel
ShapeRound
BrandIKO
Bore Size8 mm
Thickness10 mm
FinishPolished
Packaging TypeBox
Features:
  • The new X-life yoke and stud type track rollers PWTR and PWKR have been improved in several respects and, as a result, give even higher performance.

Yoke Type Track Rollers:

  • Yoke type track rollers of series PWTR are double row units mounted on shafts or studs. They comprise thick-walled outer rings with a profiled lateral surface and full complement cylindrical roller sets. Bearings without a cage have the largest possible number of rolling elements and therefore have particularly high load carrying capacity. They can support high radial loads as well as axial loads arising from slight misalignment and skewed running; they are suitable for cam gears, bed ways, conveying equipment etc. 

Stud Type Track Rollers:
  • Stud type track rollers PWKR comprise thick-walled outer rings with a profiled lateral surface, solid section roller studs with a fixing thread, axial washers and full complement cylindrical roller sets. They can support high radial loads as well as axial loads arising from slight misalignment and skewed running. 

Lateral surface profile of the outer ring:

  • In most cases, yoke and stud type track rollers with a crowned lateral surface are used since they are often inclined in relation to the mating track and edge stresses must be avoided. In series PWKR and PWTR, the lateral surface has the optimised INA profile.
  • Due to a modified material and the optimised raceway geometry of the outer rings, the basic rating life has been increased by up to 30%. The static and dynamic load carring capacity has also been increased. At the same time, the stress placed on the mating track has been reduced as a result of the optimised lateral surface profile and its improved surface quality. This gives a highly robust bearing arrangement with an extended operating life.
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Lakshmi Trading Co.. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.